Greystoke garden gate

With the new latch forged and rivetted in the gate is looking a lot more complete. The surface has now been given a good coat of Zinc rich paint to keep the rust away whilst we fill in the holes in the top rail.

Greystoke garden gate

All the paint has now been burnt off and the whole gate given a thoroughly good going over with a wire brush. There is only one small hole on the top rail that needs filling, then we can begin to pour paint into all the gaps around the uprights.

Greystoke garden gate

This is a close up detail of the scrolls now that they are cleaned up. The quality of both the scrolls and the firewelds are fantastic. Today we will be making the latch handle that was missing, i will post pictures of the making of that later.

Greystoke garden gate

Having used scroll wrenches to carefully bend the bars back into line the gate is looking a lot better now. We will use a small blow torch next to carefully remove the stubborn paint then look at filling the holes in the top rail with a resin.

Greystoke garden gate

We first used a wire brush on a grinder to remove the worst of the rust and loose paint. Normally a mild shot blast would be used to completely remove paint and rust.
You can start to see the really delicate forgework of scrolls and the neatness of the firewelds.
Once the whole of the gate has been cleaned off we can start to straighten up all the bent parts and assess what needs to be remade.

Greystoke garden gate

This gate was found in a skip a number of years ago, it has since been in residence at Greystoke cycle cafe in Cumbria. Whilst i was up there doing a course last week we were wandering around the garden (with Annie, the Owner) and we came across this delightful little gate. It has some lovely little details such as the fire welded scrolls along the mid rail, a latch (minus the pull handle which runs through the arch and the top rail.) All the tenons are nice and tight in their frames and apart from some bent rails is in fantastic condition for its age. So, needless to say it came back in the van with us and we will attempt to restore it to its former glory!